The Atlas unit heaters have a big heart: a coil that has been conceived, designed and manufactured specifically for heating industrial environments. The thickness of the pipes, steel as standard, the diameter (Ø 22 mm) and the excellent ratio between the flow-rate of air and the heat output guarantee long life and exceptional comfort. The Atlas unit heaters are made in 10 sizes, with heat outputs from 5 to 120 kW, and are available with 1 row coils for steam or high-temperature water systems, 2 row coils for hot water systems and 3 row coils for low-temperature hot water systems. They can be installed on the wall and on the ceiling.A vast range of accessories, such as additional ducts for taking in outside air and recirculation, flanges, motors with IP 55 protection, explosion-proof motors, multifunction controls with room thermostat, non-standard configurations (special voltages, special pipes) ensures the right solution in all situations.
The HELIOS unit heaters, built with the same criteria of sturdiness and safety that define all Sabiana products, stand out for the splendid new design of the casing, made using anodised aluminium bars and polished die-cast corners. They have the same big heart as the Atlas unit heaters: a coil that has been conceived, designed and manufactured specifically for heating industrial environments. The thickness of the pipes, steel as standard, the diameter (Ø 22 mm) and the excellent ratio between the flow-rate of air and the heat output guarantee long life and exceptional comfort. The Helios unit heaters are made in 6 sizes, with heat outputs from 5 to 60 kW, and are available with 1 row coils for steam or high-temperature water systems, 2 row coils for hot water systems and 3 row coils for low-temperature hot water systems. They can be installed on the wall and on the ceiling.
The Comfort circular unit heaters, for ceiling installation only, are especially suitable for high rooms, even if the optimum ratio between the air flow-rate and the heat output make them suitable for any manufacturing environment. The large heat exchange coil and the fan downstream of the coil ensure optimum mixing of the air in the environment, meaning less stratification of the hot air than with traditional unit heaters. Four different diffusers ensure perfect control of the air flow, with the possibility on the more common diffusers to tilt each louvre in the desired direction. The Comfort unit heaters are made in 10 sizes, with heat outputs from 17 to 107 kW, and one or two speeds motors.
The Polaris circular unit heaters, for ceiling installation only, are especially suitable for high rooms, even if the optimum ratio between the air flow-rate and the heat output make them suitable for any manufacturing environment. The large heat exchange coil and the fan downstream of the coil ensure optimum mixing of the air in the environment, meaning less stratification of the hot air than with traditional unit heaters. When supplied with cold water they can also be used in the summer months, thus allowing cooling at very reasonable costs. The Polaris unit heaters are made in 10 sizes, all fitted with very silent two speeds motors motors, heat outputs from 17 to 107 kW and cooling capacities from 2 to 20 kW.
The Janus unit heaters can be used to economically cool industrial, commercial and sporting facilities, transforming a traditional heating system using unit heaters into a system that can also be used in the summer months, significantly improving the working conditions. The condensate collection tray is built into the appliance, while two-speed motors are fitted as standard. Upon request, controls with thermostat can also be supplied. The Janus unit heaters are made in 4 sizes, each with 3 and 4 row coils, for a total of 8 models, with heat outputs from 16 to 104 kW and cooling capacities from 5 to 28 kW.
The Elegant ECM Sabiana air conditioners allow, at very economical cost, to heat and cool small and medium size environments, like shops, show rooms, workshops, supermarkets. The range is made up of 12 models: 8 RE-ECM models, for heating only, and 4 PE-ECM models, for heating and cooling. All models are for ceiling installation and for hot/chilled water supply. The Elegant series uses an innovative brushless synchronous permanent magnet electric motor controlled by an inverter card that is directly installed on the unit. The heat outputs range from 6 to 26 kW and the cooling capacities from 4 to 10 kW.
The AIX unit heaters are made with stainless steel structures and heat exchange coils with stainless steel pipes and flanged fittings, and aluminium fins. They are available in four sizes, for a total of eight models. These appliances can be supplied with hot water, high-temperature water and steam. They are especially suitable for working environments in which these types of system configurations are required.
The Atlas unit heaters can be supplied with the innovative Jetstream induction flow optimiser, in the manual version or the motorised version for wall-hung or ceiling installation. The lower outlet temperature of the air from the appliances means less stratification of the hot air in the building and less appliance operating time for the same ambient temperature. In addition, the increased air throw means greater uniformity of the temperature at floor level, with an expansion of the comfort zone, and consequently the possibility to install smaller and more silent appliances.
Since 1950 Sabiana has been manufacturing hot water, high temperature hot water and steam unit heaters for heating industrial and commercial environments, with proprietary manufacturing technology and a wide range of solutions.In all the European countries the most common heating system for industrial environments uses hot water unit heaters connected to a central heating system.The excellent ratio of indoor comfort to system cost, continual improvements in efficiency of hot water production, using both condensing boilers and heat pumps, the use of specific solutions such as flow optimisers on the units, as well as flexible installation and easy adaptation to new production plant layouts even after installation, mean that still today thousands of designers and businesses propose and adopt this heating solution.A further development is proposed in this catalogue:every model is provided with an electronic motor controlled by a built-in inverter. The ECM motors allow electric energy saving if compared to traditional asynchronousmotors and they enable to continuously adjust the air flow and control the ambient temperature with precision, with further benefits in terms of very low noise levels.All range is compliant with the new ERP 2013 Regulation (EU) No. 327/2011 which requires very low electric consumption ratings in relation to performances provided.Sabiana is the leading manufacturer of unit heaters, and competes worldwide providing the latest technology in environmental comfort.
